Automotion Reno

Servicing Northern Nevada Car Owners since 1975

Professional Auto Maintenance at Automotion: Brake Noise

Your brake pads are the vital parts that rub against the rotor (or disc) to slow and stop your auto. They eventually wear down.

When your pads are worn too much, they won’t stop your vehicle as well. When the friction material is worn away, metal parts of the pad are exposed and you’ll hear a squeal or grinding sound.

That’s when Reno car owners should replace their brake pads. Not only will new pads restore your stopping power, but replacing them on time will prevent damage to the rotor.

If your brakes are making noise, ask your Automotion service advisor to inspect your brakes. Addressing problems early will restore your safety and prevent pricey brake damage.

Give us a call

Automotion
(775) 624-5152
225 Telegraph Street
Reno, Nevada 89502

Put On The Brakes: Brake Service At Automotion

When it comes to preventive maintenance and car care, most Reno motorists know how vital it is to check their brakes. But brakes are more than just brake pads and shoes. There are a lot of components in the brake system, and they all need to be in good working order.

The pads and shoes are known as the friction materials in the brake system. They push together, providing friction, which stops the vehicle. It’s no wonder they have to be checked regularly for wear, and that brake pads and shoes need to be replaced periodically.

Brake pads/shoes gradually wear out, but that doesn’t mean your braking gradually becomes less effective. The pads are engineered so that they maintain good braking until they wear too thin to provide adequate friction. At this point, they need to be replaced.

But your braking system also has mechanical parts. These pistons and springs can also gradually wear out or get gummed up by oil, dirt and other road spatter. A brake inspection in Reno at Automotion includes a check of these parts as well as the pads and shoes. Your friendly Automotion service advisor can then advise you of any parts that need cleaning or replacement.

The fluid component to the brake system needs a regular check-up at Automotion as well. The brake fluid cools and protects your brake system. Protective additives are gradually depleted by the operation of the brake system, and moisture build-up inside the fluid can diminish its effectiveness. When you have your brakes serviced at Automotion in Reno, the fluid should be checked and, if needed, replaced, which will clean out water, debris and dirt.

It is vital to remember that your brake system also includes your tires. No matter how well your brake system is performing, if your sedan tires are worn, you won’t get good stopping power. Traction is the gripping power of your tires to the roadway. Traction is always better on tires with a good tread. Good traction translates to good braking.

This is particularly essential on wet Hidden Valley roads. A good tire will give you good braking on either wet Nevada roads or dry. But stopping distance increases dramatically when worn tires meet wet roads. Tread on a tire acts to channel away water as the sedan passes over the wet road, thus maintaining contact between the tire’s surface and the road, which maintains traction. But the thinner the tread, the less effective the water channels become, and water can get between the tire and the roadway, reducing friction. A loss of friction means a longer stopping distance and possibly the loss of control.

Braking depends on two things: the weight of your sedan and the speed of the vehicle. The heavier the vehicle or the faster the vehicle, the more braking power it requires. Thus, brake systems vary from vehicle to vehicle. For example, a pickup that is designed for heavy loads has a more powerful braking system than a compact car. Sports cars also have higher-grade braking systems than minivans.

Regardless of what kind of car you drive in Reno, it is always good auto advice to keep your brake system in good repair, and that means ALL of your brake system. Just one more way to keep your travels accident and worry-free.

Brake Service at Automotion in Reno

Brakes really aren’t optional equipment for Reno car owners. And taking care of them isn’t optional either.

A regular brake inspection is on every Nevada car’s maintenance schedule. At Automotion, our team will check your brake system and let you know if there are any important problems. Of course, if you’re having trouble with your brakes, get your car into your Reno or Hidden Valley service center right away. And watch out for these problems:

  • Low or spongy brake pedal
  • Hard brake pedal
  • A brake warning light that stays on
  • Constantly squealing or grinding brakes
  • Vibrations or clunking sounds when you apply your brakes

There are two types of brakes: disc and drum. Disc brakes have a rotor that’s attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle. Drum brakes are more common on back wheels. Pads, called shoes, push against the inside of the drum to slow the vehicle.

There are several things that need to be serviced on the brake system. First, the brake pads and shoes wear out with use, and become too thin to really help. If the brake pads wear away completely you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced and that can be costly. But putting it off is dangerous because your sedan won’t stop as quickly. Sometimes rotors warp or crack and must be replaced.

Brake fluid is also vital. When the brakes are applied, the pressure in the fluid activates the brake pads or shoes. Not enough fluid, not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and detrimental brake damage, and with hard use, the brakes could severely fade or even fail. Reno auto owners should change the brake fluid when their auto maker recommends it.

There are different grades of brake pads sold in the Reno area. There are regular, metallic and ceramic – higher grades are more expensive, but give better braking performance and smoother operation. It’s OK to upgrade your brake pads. But, never use a grade that’s lower than what the vehicle manufacturer recommends.

Be sure to properly maintain your brakes because it’s a lot cheaper than paying your nearest Sparks area body shop after an accident.

Stop It! You Need Good Brakes

Good brakes are obviously very important. If you’ve ever had your brakes go out while you’re driving around the Sparks area, you’ll know how terrifying it can be. Today we’ll focus on how to tell when you have a brake problem, and how to make good repair choices.

Often, the first indication that something’s wrong with the brakes is an unusual sound. It could be a squeal, chatter or grinding sound.

Some brake pads have a little piece of metal embedded in them that will make a squeal or chirping sound when the brake pads have been worn down to the point that they need to be replaced. It’s an early warning indicator.

When you hear that sound, schedule an appointment at Automotion soon.

Now a chattering sound is more urgent. That usually indicates that something is loose. It could be a brake pad or even the brake calipers. If one of those parts falls off, you could have some serious trouble stopping the vehicle. It would be a good idea to park it until you can get into the shop.

A grinding noise usually means that the brake pad is completely worn away and the metal parts of the brake are rubbing directly on the metal brake rotor. That means the rotor is being damaged and will need some work. More on that later.

Another warning sign is that your brake pedal may feel soft and spongy – or it may even feel very hard to push in. Both could mean trouble. And of course, you may get a dashboard brake warning light.

Now when it comes time to replace your brake pads, you have a choice to make. You can get the same pads that came standard on your vehicle. You can expect the same performance and durability as with the pads that came on the car from the factory.

Now you can also get a budget brake pad. Sometimes drivers insist on lower cost pads. That’s OK if the budget demands it, but you need to be aware of the trade offs. Lower grade pads are usually noisier, so you’ll have to live with more noise when you apply the brakes. They also tend to generate a lot more brake dust, you know, that black dust that accumulates on your wheels. And they probably won’t last as long either. In our opinion, that’s a lot of compromise for just a few dollars in savings.

You can also choose to buy premium brakes pads. These perform at higher specifications than the factory pads. You can expect quieter operation, less brake dust and better stopping power.

Now, getting back to the rotors. The rotors are the discs that the brake pads clamp down on to stop the vehicle. If you’ve been driving with completely worn brake pads, you’ve scratched grooves into the rotors. If the grooves aren’t too deep, the rotor can be resurfaced. A thin layer of metal is cut off the surface of the rotor to make it smooth again.

Now, if the grooves are too deep or if the rotor has already be resurfaced before, there may not be enough material to resurface and still have a rotor that’s thick enough to safely stop the vehicle. In that case, the rotor will have to be replaced.

Something that’s often overlooked is the brake fluid. Your manufacturer has a recommended schedule for evacuating the old brake fluid, cleaning the system and refilling it with fresh brake fluid. This is really important to brake performance.

So here’s the bottom line: if you suspect, inspect. If you notice any of these warning signs, have your brakes inspected. Your advisor can help you make the repair decision that’s right for you.

Braking News: Keep Your Stopping Power

Richard Petty once told AutoNetTV, “You’ve gotta have good brakes. If you’ve got good brakes you can keep yourself out of a lotta trouble.”

That’s why a regular brake inspection is on every Reno car’s maintenance schedule. An inspection at Automotion will check your brake system and let you know if there are any problems.

Of course, if you’re having trouble with your brakes, get your car into Automotion right away. Here are some symptoms to watch for:

  • Low or spongy brake pedal
  • Hard brake pedal
  • A brake warning light that stays on
  • Constantly squealing or grinding brakes
  • Vibrations or clunking sounds when you apply your brakes

If you are experiencing any of these, it’s time to get your brakes checked.

There are two types of brakes: disc and drum. Disc brakes have a rotor that’s attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle.

Drum brakes are more common on back wheels. Both types have pads or shoes that press against the brakes and slow the vehicle. Brake pads and shoes are made out of very tough material to withstand the heat and force generated when stopping your car. Eventually, they wear out with use, and become too thin and need to be replaced.

If the brake pads wear away completely, you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced. That’s not only expensive, but also dangerous because your vehicle won’t stop as quickly. Sometimes rotors warp or crack and must be replaced.

Brake service will also include a check of your brake fluid. When the brakes are applied, the pressure in the fluid actives the brake pads or shoes. Not enough fluid means not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and brake damage, and with hard use, the brakes could severely fade or even fail. You should change the brake fluid when your manufacturer recommends to avoid these problems.

There are different grades of brake pads; good, better and best. Higher grades cost more, but give better braking performance and smoother operation. It’s OK to upgrade your brake pads. But, never use a grade that’s lower than what the manufacturer recommends.

So, be sure to properly maintain your brakes, because it’s a lot cheaper than paying the body shop after an accident.

Come in to Automotion for an brake inspection before damage occurs. You can call ahead for an appointment by calling (775) 573-8496.