There’s not much we can do about the price of gas in Reno Nevada, but we do quite a bit about how much we use as we’re driving on our Reno streets.
Our driving habits can dramatically affect our fuel economy.
The first thing we can do is watch the ‘go-pedal’. Hard acceleration just sucks the gas. Gently leave stop lights and plan lane changes so you don’t need to floor it. That can save you hundreds of dollars a year.
Go a little slower on the freeway to Sparks. Once you’re going more than sixty-five miles an hour your fuel economy starts to drop dramatically. Leave early so you don’t need to rush to be on time. And cruise control is your friend – steady speed uses less gas.
Plan errands ahead. Make fewer trips by combining errands.
Hey at current gas prices, a lead-foot might as well be a gold foot.
Automotion 225 Telegraph Street Reno, Nevada 89502 (775) 624-5152
Your engine is like a finely choreographed dance. All the parts have to work together. If the timing is off at the ballet, dancers crash into each other and fall down. It the timing is off in your engine, it may not run at all. One of the most intricate dances in your engine, has to do with the combustion cycle.
Your sedan engine has cylinders in which a piston travels up and down. At the top of the cylinders are valves open to bring in the air and fuel. And there are valves that open to let out the exhaust after the fuel has been burned.
Call Automotion at (775) 624-5152 for answers about your timing belt, or drop by our Reno Nevada service center on 225 Telegraph Street, 89502
It’s critical that the values be timed to open and close at precisely the right time in the combustion cycle, or the engine will run poorly or not at all.
The timing belt is responsible for rotating the shafts that control the valves. It’s vital and precision work. Timing belts are made of very tough flexible material. They can last a long time. But they eventually wear out and can break. The consequences can be disastrous.
In some engines, the valves actually protrude far enough into the cylinders that they could come in contact with the piston. If the timing belt breaks, the pistons will smash into the valves. Valves get bend or broken. If the engine is spinning fast enough, the broken parts will shred the cylinder head as well. Repairing this damage can cost several thousand dollars.
It’s a sad day when this happens; especially since it usually can be avoided. Manufacturers have issued recommendations for when you should replace your timing belt. For some engines, it’s at 60,000 miles. For others it’s at 90,000 miles or more. If you’re approaching 60,000 miles, or have passed it, make sure you check your owner’s manual or with your Reno Nevada auto service advisor at Automotion for when the timing belt should be replaced. Don’t let this one slip by.
Now some timing belts are visible and can be inspected. Others are hidden under a protective cover and are hard to get to. Some timing belts also drive the water pump. If you have a leaky water pump, the coolant will contaminate the timing belt and could make it fail sooner. So if you have this kind of engine, get it in to Automotion for an inspection right away if you have a coolant leak.
Most people in the Sparks area with this engine design end up with a new timing belt when they replace the water pump. And when you’re having your timing belt replaced on schedule, check with your Reno Nevada auto service advisor at Automotion to see if it makes sense to install a new water pump, even if it isn’t currently having problems, since most of the labor is already being done any way for the timing belt replacement.
As a heads up; larger engines will often have metal timing chains rather than belts. The chains don’t need to be replaced like belts.
We’ve already told you how very expensive it can be to get your car running again after a timing belt fails. You also need to know that replacing the timing belt is very labor intensive and is one of the most costly maintenance services you will have. So if you will be at the point where your timing belt should be replaced in the next year or so, ask for an estimate from Automotion in Reno Nevada so you can begin to prepare for the expense.
We at AutoNetTV are committed to helping you make your driving experience as safe and economical as possible. Automotion, your Reno service center, can be a valuable partner. Please take advantage of their knowledge and experience, and check out http://AutoNetTV.com for more great auto tips.
So what is the most distracting food to have in the car while driving around Reno?
A Soft Drink, or
Well, you may be surprised to learn that all but the gummy bears are in the top ten most distracting foods when you are driving, but if you chose ‘coffee’, then give yourself an extra two points; coffee is the number one food distraction for drivers in Reno and around the country.
Food distractions cause 25 percent of all car accidents; over a million and a half each year!
You’ll notice that all of the top ten distracting food items are messy. Messy foods are the type of food you might spill (very distracting!), then try to clean up (a safe-driving impossibility!). If you gotta eat on the run, take five-then drive. You’ll thank yourself later for two reasons, one being that you can actually relax for just a moment in our fast-paced world, and the other is that you won’t have to worry about getting that cinnamon roll frosting out of your dashboard after that near miss.
Keep drinks in spill-proof containers, too, so you can keep your eyes on the Reno road without worrying about where that spill is headed.
So; taking a food break… Or filling out accident reports. We don’t have to ask you which you prefer: It’s a no brainer.
Automotion, along with AutoNetTV, wants you to keep both eyes on the road. Please eat safely and keep your eyes on the road.
Automotion 225 Telegraph Street Reno, Nevada 89502 Give us a call at: (775) 624-5152
Make an appointment with Automotion to have your on board diagnostics analyzed. 225 Telegraph Street Reno, Nevada 89502 (775) 624-5152
Today we’re going to talk about on-board diagnostics and the questions we hear from folks around Reno Nevada who need answers about diagnostic services. They want to know what diagnostics are, what’s involved and what the benefits are. They really want to understand the value of diagnostic scans by a trained technician in Reno Nevada.
These are valid concerns. If you don’t understand something it’s really hard to know its value. Let’s start with some history.
Since 1996, all cars and light trucks in Reno Nevada have been required to use a standardized diagnostic system to help repair technicians determine what’s wrong with your vehicle. The diagnostic system works with the vehicle’s Engine Control Module – the computer that controls many engine functions.
The computer monitors dozens of components and processes. Depending on what the sensors read, the computer will make adjustments to compensate for conditions and minor problems. When there is a condition that it can’t adjust for, the computer will turn on the check engine light.
It is also called the ‘service engine soon’ light on some vehicles. The warning light signals you to get into your Reno Nevada service center so that the trouble code can be read and the problem can be fixed. Your service center will have a scan tool and powerful software that will help the technician diagnose the problem.
If you’ve searched for check engine light on the internet, you may have seen that you can buy an inexpensive scanner or go to an auto parts store to have the trouble code read to tell you exactly what’s wrong.
That’s a common myth. The code itself doesn’t tell you what’s broken. It starts you looking in the right place. It tells you what engine parameter is out of range – but it won’t tell you what’s wrong or how to fix it.
Let’s say you think your daughter has a fever. You take her temperature and it reads one 102 degrees. You’ve confirmed a fever, but you don’t know what’s causing it. Is it a 24 hour flu, an infection, appendicitis or leukemia? A fever is a symptom of all of these medical problems, but it takes a skilled physician’s examination and additional diagnostic tests to find out what is actually causing the fever.
An example of a trouble code could be: P0133, which reads ‘Bank 1 sensor 1 circuit slow response’. This means that the front oxygen sensor has a slow response time to changes in the air-fuel mix. If that’s all you knew about cars, you would think your oxygen sensor was broken and would replace it. Now, it could be the oxygen sensor – but it could also be a bad or contaminated airflow sensor, exhaust leak, electrical problem, an intake manifold leak or any of a number of other things.
You can imagine a lot of oxygen sensors have been replaced because of that code. So the on-board diagnostics point the way to where the trouble lies, but it takes some skill and high-tech equipment to actually pinpoint the problem. The cheap scan tools that a consumer can buy do not have the ability to retrieve some of the operating history that’s stored in the engine control computer. That history’s very helpful in diagnosing the problem. Service centers like Automotion invest a lot of money in high-end diagnostic tools to help solve the mystery and get you back on the road as soon as possible without replacing a lot of parts that don’t need replacing.
So, on-board diagnostics provide a powerful starting place for a highly-trained, well-equipped technician to get to the bottom of your problem. When your check engine light comes on, get it checked at Automotion. If the light burns steady – don’t panic. Get in to Automotion soon to have the engine scanned. A flashing check engine light means that there is a severe engine problem. Get in as soon as you can – waiting too long can lead to very expensive damage.
And try to not drive at high speed or tow or haul heavy loads with a flashing check engine light.
Flats, blow outs, skids and longer stopping distances can all be the result of Sparks folks driving around on under-inflated tires. Now, it’s hard to tell when a radial tire is under-inflated. If your manufacturer recommends 35 pounds of pressure, your sedan tire’s considered significantly under inflated at 26 pounds. The tire may not look low until it gets below 20 pounds.
New laws required manufacturers to include a Tire Pressure Monitoring System – or TPMS system – in all cars and light trucks by the 2008 model year. The system has a dashboard mounted warning light that goes off if one or more of the tires falls 25% below manufacturer’s pressure recommendations.
This technology has been used by Sparks race car drivers for years. They are able to head off problems from under inflation by closely monitoring tire pressure on the track. It’s up to your car’s manufacturer to determine which of many TPMS systems available they’ll use to comply with the law.
Obviously, all of this doesn’t come free for Sparks drivers. U.S. government studies have estimated the net costs. Of course, the TPMS system itself will cost something. Maintaining the system will have a cost, replacement of worn or broken parts and tire repair cost increases.
The costs are partially offset by savings in fuel and tire wear. There’s also a saving in property damage and travel delay. The net cost is estimated to be between $27 and $100. The government predicts fewer fatal accidents. They estimate that it will cost between three and nine million dollars for every life saved.
Your safety has always been a concern at Automotion. We want you on the road and accident free. We’ve traditionally provided things like tire rotations, snow tire mounting and flat fixes at a very low cost. We’ve been able to quickly and cheaply provide the service, and pass the low cost on to you as an expression of our good will.
That’s why we’re concerned about how you’ll perceive the changes that this new law will force. Every time a tire is changed: taken off to fix a flat, a new tire installed, a snow tire mounted; the Automotion service technician is now going to have to deal with the TPMS system.
Even a simple tire rotation will require that the monitor be reprogrammed to the new location of each tire. When a car battery is disconnected, the TPMS system will need to be reprogrammed. TPMS sensor batteries will need to be changed and failed parts replaced.
Like all other Sparks service centers, here at Automotion we’ve had to purchase new scanning equipment to work with the TPMS sensors and to update expensive tire change equipment to better service wheels equipped with the new monitoring systems. Our Automotion service technicians have been thoroughly trained on many systems and new tire-changing techniques. All of this adds up to significantly increased cost to perform what was once a very inexpensive service for you.
So when you start so see the cost of tire changes, flat repairs and rotations going up at Automotion, please keep in mind that it’s because of government mandated safety equipment. We want to keep you safely on the road – and we’re committed to doing it at a fair price. This new safety equipment will help you avoid the most common types of vehicle failure in Sparks, and possibly a catastrophic accident.